A ceramics or printmaking workshop needs a work area, places to wash tools and to hold work in progress, and services suited to the processes it will teach. Have the workshop manager draw the sequence from material preparation to cleaning. Give each machine its loading and maintenance space and mark where a task passes from a participant to a technician. Show the equipment and task sequence to the people who will teach, clean and maintain the room before fixing sinks or outlets.
For ceramics, write the clay processes and firing schedule beside the equipment plan. Reserve places to set down unfired pieces and to move fired pieces after cooling. Confirm whether the sessions involve dry material or sprayed glazes. Locate the kiln so staff can handle loading, checking and cooling under the operating conditions agreed with the equipment supplier and qualified advisers. Great Britain’s Health and Safety Executive issues separate guidance on dry fettling and glaze spraying which address airborne dust and spray mist respectively. Its kiln guidance for craft studios also addresses ventilation and keeping combustible material clear. Ask local specialists to specify the controls for the actual processes, including extraction and its maintenance. HSE, Dry fettling HSE, Spraying glazes and colours HSE, Kilns in schools and craft studios
For printmaking, name the techniques before specifying the sinks and ventilation. Draw the route between a clean paper table, a press or screen table, a drying rack and the washout point for the techniques that use one. Give the technician the material list and safety data so they can agree on storage and disposal with local specialists. Princeton University’s guidance treats hazards by technique. East London Printmakers schedules an induction at the beginning of a session for new users. On the plan, give the new group somewhere to see and hear that briefing while an experienced user sets up elsewhere. Princeton University, Lithography and Relief Printing East London Printmakers, Community Access
Ariel André and GOLEM gave Diriyah’s print room wet and dry areas for a mix of processes, while the adult workshop has its own equipment. In a new arts centre, mock up one complete work position with the table, tools and trolley. Have the instructor demonstrate a task with the layout in place. Ask participants who work seated or standing to try it, including getting tools and setting down work. Ask the access adviser to identify the dimensions that apply before the mock-up. Check reach and knee space at each station and record where a worktop needs to change. Section 902 of the US ADA Standards addresses clear floor space, knee and toe clearance and height for covered work surfaces in the United States. ArchDaily, Diriyah equipment and room descriptions US Access Board, Built-In Elements, section 902
The Diriyah workshop has fixed and movable tables, with gaps between the collage tables for cables according to GOLEM’s description. The printroom has wet and dry areas and a separate darkroom. The studio also describes standing-height tables usable with high stools. The first trial for a similar building can follow someone from a clean table to a wet process and back, drawing the route of supplies and checking what people can reach at each work surface. A candidate can use the same trial when showing a first working sample of workshop furniture. ArchDaily, Diriyah Biennale Foundation Public Programs Building