GOLEMArchitecture·Art·Design

08.c.1What should a full-scale furniture prototype prove before fabrication begins?

A bench with an unresolved seat section needs a prototype with the actual support and upholstery. At a kiosk, a trial of staff reach needs the real drawer travel and working equipment. In each case, the team should agree which part the prototype represents, what decision it will settle, and who can accept the result.

Make a sample that can answer the question

In their 2008 paper on prototypes, Youn-Kyung Lim, Erik Stolterman, and Josh Tenenberg describe prototypes as “filters” and “manifestations of design ideas.” Their computing examples distinguish what a prototype explores from how it is made. Applied to a piece of furniture, a cheap full-scale footprint can settle who can pass an open drawer. A production hinge and a finished edge are needed to judge how the door actually feels and whether the neighboring panel can be removed. The model’s material, resolution, and scope should follow the decision. Youn-Kyung Lim, Erik Stolterman, and Josh Tenenberg, The Anatomy of Prototypes, ACM TOCHI 15(2), 2008

Politecnico di Milano’s Wood Design exhibition documents a sequence of models, full-scale trials, and prototypes of wood products and furniture. That order lets the design team build a short test before it commits to making an entire object. If two materials meet at the corner of a long piece, mock up one working corner with the production supports. Include the second piece if its mating edge can drift in manufacture. A tabletop sample on its own can show finish and reflectivity. Add a real frame only when the next decision depends on where the top sits under load. Politecnico di Milano, Wood Design. Dal modello al prototipo, 2025

A Forestry and Forest Products Research Institute poster from Japan records steam softening and hot-press trials at a 400 mm bend radius, using hardwood samples 21, 30, and 35 mm thick. It also lists chair prototypes and separate product evaluations underway. The poster gives research conditions. The design team can use the method to see how changing a stock thickness or a species affects the piece the shop is proposing. The sequence is useful for a design that depends on repeatable curvature. Ask the shop to produce a sample whose grain direction, thickness, jig, and finish correspond to the proposed process. Record whether a change to any of those inputs invalidates the visual sample or calls for new technical evidence. Forestry and Forest Products Research Institute, 早生樹等の国産未活用広葉樹材の曲木特性, research poster

Give approval a drawing number

In Alexander, Koester, and Grunawalt’s chair-rise study, the researchers set up controlled changes to particular chair features and took separate observations for rising and seated comfort. Apply the distinction to a test with users. Have one chair section that differs from another in the variable under discussion, and record what happened and which setup was in front of the participant. A prototype for a public bench may need actual upholstery for a rise test and a second, production-built section to approve a seam. If someone asks the fabricator to change the foam after approval, put the seat trial back into the decision list. Neil B. Alexander, Daniel J. Koester, and Julie A. Grunawalt, Chair Design Affects How Older Adults Rise from a Chair, JAGS 44(4), 1996

At the first review, a useful decision may be limited to geometry. Agree the gap needed for the drawer to open and keep the finish review open. If a joint depends on drying, tool marks, or the intended bending process, ask the maker for a second specimen made the same way as the goods will be made. At the end of the review, mark the drawing revision and the production process against the accepted features. Photograph the surface in light comparable to the installed condition and write down the identifiable material and finish. Add a statement of what the trial leaves for later inspection, such as the route the piece will take on a cart, or a separate strength test. The owner can then allow the supplier to purchase material while holding a particular detail for a pending test. Inspect an early production unit against the accepted sample before the full delivery is repeated.