GOLEMArchitecture·Art·Design

08.b.2How can a display fixture change the route through a gallery?

A gallery with a work that can be seen from both sides may need a freestanding support. A wall-mounted shelf can leave a wider path where a work is viewed from the front. The gallery team can set the depth and position of either fixture on a drawing that shows where someone looks at the work, where they read the label, and where other visitors pass.

Give the object more than one approach

At the Museu de Arte de São Paulo, Lina Bo Bardi’s glass easels hold works on glass plates fitted into concrete blocks. MASP describes the easels standing in rows without partitions and dates the original installation to 1968 and their return to 2015. In a University of Campinas research abstract, Erica Lelis describes the wooden wedge involved in fitting the glass support into the concrete base. The choice frees the wall and puts the support itself in the field through which visitors walk. A visitor can approach the face, walk around the support, and encounter the reverse. The floor plan needs to locate these stops on the same drawing as the occupied thickness of the base. In a smaller gallery, start with one object that benefits from this kind of approach and draw how it will change the position of the neighboring supports. Museu de Arte de São Paulo, Acervo em transformação Erica Lelis, UNICAMP undergraduate research congress, Experiências Museográficas: a retomada dos cavaletes de Lina Bo Bardi no MASP, 2017

At Castelvecchio in Verona, the Italian Ministry of Culture’s architecture inventory describes Carlo Scarpa’s placement of the equestrian figure of Cangrande on a concrete bracket with metal walkways around it. The figure stands at the joint between two parts of the museum. That is an example at the scale of a building. At furniture scale, a low plinth set near a bend can make a side of a sculpture visible before somebody enters a room. Place the support and the nearest edge of the circulation together. Give the person stopping beyond the corner their own space so a visitor arriving from behind can read the direction of the route. Ministero della Cultura, RESTAURO ED ALLESTIMENTO DEL MUSEO DI CASTELVECCHIO, Censimento delle architetture italiane

Give the case a front that people can use

The angle matters when someone looks down at the object and needs to see a particular surface. The Smithsonian Institution’s exhibition guidance illustrates the difficulty of seeing the inside of a bowl in a tall case from a seated position and discusses shallower cases. Work backward from the portion visitors need to see to the height of the case deck and the depth of the glazing. Include the visitor who needs to get especially close to read. Put the label where a group can refer to it without standing immediately in front of the only view. Smithsonian Institution, Guidelines for Accessible Exhibition Design

A fixture drawing also needs the service side. The U.S. National Park Service museum handbook assigns the choice of a sealed or ventilated case to work with a conservator and calls for suitable materials inside the case. The Canadian Conservation Institute identifies acidic emissions from some woods and paints as a hazard for sensitive objects in an enclosure. Show the space a technician needs to open and service the case, and ask what the design can do to keep the most frequent service operation away from the approach people use. Show the case with its door or panel fully open. A hinged panel can occupy the first part of the route to the crate, whereas a removable end may require a second technician and a temporary support. Have the registrar approve the object path and the conservator sign off on the case materials before fixing the layout. U.S. National Park Service, Museum Handbook, Part III, Chapter 7, 2001 Canadian Conservation Institute, Agents of deterioration: Pollutants

The white Showbox in GOLEM’s account of Paradise Row Projects was inserted in an irregular former shop with non-removable walls. An occupied plan can show how an inserted display gives a visitor a second approach and where someone would stop to look. For a gallery with similar constraints, the first prototype can show the distance required to read a label, which face carries the works and whether someone already looking leaves room to pass. The first view of the display also bears on how to lay out a quick visit and a longer one.