GOLEMArchitecture·Art·Design

08.b.3How do you make a shared worktable usable from a wheelchair?

A person using a wheelchair should be able to join the group at the shared worktable, approach the surface from the front, and reach the materials. A section through that place shows what the legs, apron, storage and cable tray leave for knees and toes. A suitable top height can still leave someone too far from the work if a component below gets in the way.

Measure under the surface

In the United States, the 2010 ADA Standards use section 226 to scope covered dining and work surfaces, and section 902 for technical requirements. For the adult surfaces subject to section 902, the top is 28 to 34 inches above the finished floor. The standards also call for a forward approach under section 305 and knee and toe clearance under section 306. Those sections have their own geometry. Draw the outline of the available clearance at a leg, at the apron, and at the deepest point occupied by a service tray. U.S. Department of Justice, 2010 ADA Standards for Accessible Design

For newly constructed public establishments within the scope of France’s April 20, 2017 accessibility order, article 11 gives an example with different dimensions. For relevant fixed public-use furniture used to read, write, or use a keyboard, the maximum height is 0.80 meter, with an underside void of at least 0.30 meter deep, 0.60 meter wide, and 0.70 meter high. Keep the project’s regulatory checks tied to its location and scope. The fabrication drawing should show the actual lowest obstruction, including a bracket or folded edge that sits below the dimension shown on a general arrangement. France, Arrêté du 20 avril 2017, Légifrance

A table can share a room with a staffed counter or a check-in point. Portugal’s Decree-Law 163/2006, annex section 2.12, links accessible service counters and windows to an accessible route and a clear frontal or lateral approach. At least one counter or window, where provided and in scope, must have a service zone at least 0.80 meter long and 0.75 to 0.85 meter above the floor. At a workshop table, the task may require people to remain and use both hands. Confirm whether they need to align their hips and knees with the work itself. A transaction detail and a position for sustained making can require different support and space. Portugal, Decreto-Lei n.º 163/2006, Diário da República

Set out the tools and the other people

Portugal’s museum accessibility guide records furniture with wheelchair-appropriate heights at the Museu da Comunidade Concelhia da Batalha. To design a shared activity, have somebody complete the next step as well. Put paper, controls, tools, and refreshments where staff will ordinarily place them. Ask the participant to choose a place, begin the task, and reach a shared resource from that position. A shared tool can sit nearer the front or on a shallow movable tray. Reserve a part of the usable edge for passing work between two people. Consult the same drawing with staff who need to assist. Turismo de Portugal and Direção-Geral do Património Cultural, Guia de Boas Práticas de Acessibilidade, 2017

Ask the fabricator to dimension both the top and the lowest obstruction beneath it on the section through the approach. Then ask for a plan showing the leg spacing at the edge and farther beneath the table. A pedestal that looks clear in elevation can meet the front wheels before a person reaches the work. Mark out the occupied position beside two occupied chairs and trace the route from the entry. An end position can offer more clear floor than a tightly spaced row of legs, while a flank position can put a visitor closer to peers. Try both where the activity permits. Record in the furniture schedule which approach stays available once bins, stools, and bags are in use, and draw the room as it is normally reset after the workshop.