GOLEMArchitecture·Art·Design

08.d.2How do you design public furniture so worn parts can be repaired on site?

A cleaner needs to reach the parts of a public seat that people touch. A maintenance worker should be able to replace a marked panel, loose glide, or worn cushion without damaging the furniture around it. The venue and maker can agree which repairs staff can do on site, which parts go back to the workshop, and where to keep the instructions and spares.

Watch someone reach the part

Start with the damage staff are likely to find. A bench end beside a door will encounter knocks. A low seam beside a café seat may collect spills. A foot on a heavily cleaned floor may need more attention than a fixed back. In a mock-up, have the maintenance worker locate the repair from the front of the piece and identify the closest face they can open. Check whether that face can be reached with the furniture in the room where it belongs. Size the cover, panel, or strip so a worker can hold it clear while reaching the fasteners.

Japan’s Tendo Mokko asks for a model identification and photographs of the whole piece and the damaged area when arranging workshop repair. It excludes custom orders from the manufacturer’s usual label system. Put a fabricator’s own identifier on the part of a commissioned piece a worker can reach, and record it with a picture of the whole unit and a close-up of its connection. Maruni’s published guidance for domestic furniture advises that even the original cover or finish reference can yield a visible color difference on a partial repair because the surrounding material has aged. For a venue, the two accounts suggest two different commitments. Agree what the venue can do in an ordinary maintenance shift, then ask for a repair sample that shows how a new piece will look beside an earlier one. A visible break at a seam or at the end of one panel can make a future variation easier to accept. Tendo Mokko, 家具のお手入れ、リペア(修理)について Maruni Wood Industry, 家庭用 家具のリフォームお見積もり

Put cleaning and part supply on the drawing

The Association for Contract Textiles’ coated-fabric guide for health care seating distinguishes cleaning, sanitizing, and disinfecting. It warns that some products intended for hard surfaces can affect coated upholstery. For the proposed fabric, have the supplier confirm the facility’s actual cleaning method and products. Try that method on a material sample that includes the edge and joint. If a fastener is hidden behind an upholstered flap, include the flap in the trial and check that it can go back into position after cleaning. Association for Contract Textiles, Coated Fabric Selection Guide: Healthcare Upholstered Seating, 2020

The European Commission Joint Research Centre’s furniture procurement report proposes design for disassembly and repair, spare parts availability, and warranties as distinct criteria. Put each promise against a line in the furniture schedule. Identification can be as simple as a model number under a seat, the purchase date, and a diagram showing the first part to remove. Ask the fabricator to provide the code of a replacement or the specification a second supplier would need. Put part prices and delivery terms in the quote while the owner can compare them. Shane Donatello, Miguel Nuno de Oliveira Gama Caldas, and Oliver Wolf, JRC107824, 2017

Before handover, the maintenance team can replace one worn part and put the piece back into service. Note the tools, the time, the surfaces touched, and where the old part goes. The exercise may show that a simple glide can only be removed with another person supporting one end. Record that condition and put the appropriate procedure in the room file. Reserve work on structural parts for staff or repairers qualified for it and identify the approved operator-replaceable parts separately. Give the venue the same information for the parts built into the room and the ones it could send back to the workshop.

In GOLEM’s account, the primary structure of GROS BEAD and the assembly supporting the wooden bead surface do different work. In his KHAMSA interview Ariel André connects the material idea to familiar beaded seats. A furniture repair brief can use the construction detail to ask who reaches the first worn component, what needs to be supported during the work and where the spare parts are recorded. Those decisions can be tried on the sample the maker expects to repeat. The spare part also has to fit across different production batches. KHAMSA, Against Good Taste, a conversation with Ariel André