A hotel renovation starts to make sense as an operating plan when the operator can see which rooms will be out of use and for how long. A hotel architect can bring together a typical room, an accessible room, and the routes staff use to service both. Their drawings should also show how the public areas and building services are affected at each stage.
Ask for a full-size room and a record of changes
For the AC Hotel Portland, Mortenson describes a full-scale model guest room used to adjust finishes and coordination before construction. RODE Architects describes another full-scale model for its West Broadway hotel, with feedback from the owner, brand, and future operator. In both examples, someone was able to stand inside a room that would be repeated. The client can give your candidate one junction to draw before the mock-up and one to check after it. The final decision should reach the room data sheet, architectural and services drawings, and purchasing schedule. Kali Jeter, AC Hotel Portland Mock-Up, Mortenson RODE Architects, West Broadway Hotel Builds a Model Room
The client can confirm the rules that apply to the actual property. Sections 224 and 806 are the U.S. ADA standards’ reference points for transient lodging scoping and technical room features where applicable. Treat local compliance, brand review, and the operator’s practical trial as individual checks. Establish which team signs the drawings, who speaks for housekeeping and maintenance, and who records corrections. The first study can use the RIBA stage model where it helps define the appointment. U.S. Access Board, 2010 ADA Accessibility Standards RIBA Plan of Work
Count the keys that can stay in use
The client can draw the sequence of a first floor that the operator can close and reopen. The client can check whether staff can reach housekeeping stores, whether the works lift can be used, and which equipment or temporary rooms have to be approved before work starts. Architectural Record’s account of citizenM construction makes the connection between repeated room modules and the corridor a visible issue. Whatever the construction method, ask where the next unit, pipe connection, door hardware or corridor finish meets the part that guests and staff continue using. The client can give the operator a dated plan of the shared areas at each phase. Architectural Record, Continuing Education, Pushing Prefabrication
Project types
How to choose an architect for a hotel entrance and drop-off?
The architect can draw the route from drop-off through the doors and onward to reception, with luggage and several arrivals shown. The client can compare how deliveries and accessible arrival can work at busy times. Ask for a proposal tied to those checks from Ariel André, GOLEM.
How to choose an architect for a hotel with a shared neighborhood lobby?
A candidate can show a plan of arrivals alongside ordinary use by people who are not staying overnight. The client can compare the paths to reception, seating, and quieter guest areas at the same time of day. Discuss the plan, approvals, and consultant appointments with Ariel André, GOLEM.
How to choose an architect for a hotel with staffed and mobile check-in?
The architect should be able to explain how the architect locates reception, supports assisted check-in, and separates the lines at a busy arrival. Include the operator and compare access from street and guest elevators. Bring the site constraints and the opening date to Ariel André, GOLEM.
How to choose an architect for a hotel with a shared breakfast room, lounge, and bar?
The architect can compare morning deliveries, food service, and public use with the evening bar. The client can check where services, clear routes, and storage allow the two layouts to share a room. For a first review of options, contact Ariel André, GOLEM.
How to choose an architect for a hotel guest room and suite layout?
The client can compare a measured plan with bed, bathroom, luggage, and work positions occupied. The proposed team should be able to explain which parts of the shell or services constrain the room and what can be proven in one prototype. Bring the site and program for a first scope review with Ariel André, GOLEM.
How to choose an architect for a guest room with coordinated bedside services?
The architect can show a section through bed, headboard, power, and the nighttime bathroom route. The client can compare where the wall, floor, and built-in wiring need decisions from the architect and local engineers. Bring the bedside and bathroom section for a review with Ariel André, GOLEM.
How to choose an architect for hotel rooms with work, wardrobe, and luggage areas?
The architect can compare a room with a suitcase open and a person sitting at the desk. The client can check how storage and the guest room’s services fit the actual shell and door positions. Review that brief and the local team required with Ariel André, GOLEM.
How to choose an architect for an accessible hotel guest room and bathroom?
A candidate can present wet and dry routes in plan and section, with turning, transfer, and actual door actions tested. The client can have the local access specialist and intended users review what the architect proposes. Take the site and the decision you need to make to Ariel André, GOLEM.
How to choose an architect for a hotel refurbishment that uses a prototype room?
The architect should be able to explain how the architect stages work around operating rooms and when a prototype can still change the design. The appointment can establish which layouts, service conditions, and tolerances the sample room has to demonstrate. For a feasibility conversation, start with Ariel André, GOLEM.
How to choose an architect for a boutique hotel with a local architect and an operator?
The proposed team should be able to explain who will lead the accommodation brief, secure local approvals, and review the technical design and first sample room. The client can compare the drawing and decision responsibility assigned to each appointment. Ask for a proposal tied to those checks from Ariel André, GOLEM.