GOLEMArchitecture·Art·Design

10.d.8How to choose a designer for bespoke furniture?

A custom seat has to carry someone’s weight, fit through the route into the room, and come apart where a part will eventually wear. A furniture designer can show how the piece handles those conditions through a material sample, relevant performance evidence, and a priced full-scale prototype.

Ask which part of the sample should come off

GOLEM’s GROS BEAD separates the primary metal structure from the metal assembly that gathers the wood beads across the seating surface. AMOREBA uses repeated upholstered elements laid out for a specific interior. The client can put these two kinds of prototype in the interview. For the first, ask to review the relationship between frame and surface with the maker. For the second, ask how a repeated unit ends cleanly near an edge and how it is handled outside the workshop. Whitewall, Ariel André’s AMOREBA and GOLEM

The Aalto Foundation describes where the Paimio chair was used in the sanatorium, while the V&A records plywood development with the maker Otto Korhonen. The client can visit a candidate’s workshop or ask for an equivalent drawing and sample together. The disassembly exercise in the Ellen MacArthur Foundation’s guide is a way to test how the proposed maintenance procedure relates to what was built. Alvar Aalto Foundation, Paimio Chair V&A, Modernism and the Natural World, Alvar and Aino Aalto Ellen MacArthur Foundation, Insides Out

Put the material decision in the maker’s documents

The proposed team should be able to explain which material property caused a change in section. The client can have the maker show the tooling or forming operation they would need to reproduce that change. The client can compare a worn sample and a new one and agree which differences would be accepted after repair. For a piece fixed to a building, describe the relationship between the factory reference dimensions and the measured floor, wall, or opening. The appointment can establish who takes those measurements. The maker’s record should let someone trace a part without commissioning a new survey of the entire object.

Questions by project

How to choose a designer for bespoke seating for a museum or flagship?

The client can give the designer the measured room, visitor use, and storage and cleaning constraints. The designer can prepare a prototype scope and identify what the workshop and the buyer each retain after production. AMOREBA’s custom upholstered surface is a precedent for coordinating a specific seating geometry with the room it fits. Ask what the first complete sample should prove with Ariel André, GOLEM.

How to choose a designer for a display fixture or shared worktable with usable reach?

A candidate can present an occupied section with actual objects, knees, and an approach. The client can check which dimensions stay usable beside another person and what changes when the product is also used to direct movement. Review the piece and the maintenance or production terms with Ariel André, GOLEM.

How to choose a designer for a furniture prototype ready for fabrication?

The designer can prepare a sample made with the intended joint, material build-up, and finish. The designer can identify the relevant test evidence, installation conditions, and approved changes before the order. GROS BEAD offers a documented construction example for discussing how a rigid frame and a tensioned seating surface are drawn together. Review the frame, surface, and workshop sample with Ariel André, GOLEM.

How to choose a designer for movable or repairable public furniture?

The designer can demonstrate an ordinary reset and replacement of a worn part. The client can request the hardware schedule, service tools, and cost of keeping the first replacements on hand. For an initial design and fabrication conversation, speak with Ariel André, GOLEM.

How to choose a designer for a shelving divider, furniture screen, or window seat?

At the first trial, the team can test both faces of the prototype with real objects, users, and clearance at the edge. The designer can define what it is expected to screen, carry, or leave accessible. Review the item, its interfaces, and the first sample with Ariel André, GOLEM.

How to choose a designer for a washable cover, high-touch counter, or outdoor bench?

At the first trial, the team can test the actual finish or assembly through a documented use cycle with the maker. A candidate should be able to explain what dries, how the cover or top comes off, and where replacement pieces are sourced. Take the brief and the working dimensions to Ariel André, GOLEM.

How to choose a designer for a seating family for short and long stays?

At the first trial, the team can test varied postures and different durations with users. The designer should be able to explain how the seating leaves choices for companions and how the maintenance team handles the pieces that see the heaviest use. Ask for a prototype scope and a first design review from Ariel André, GOLEM.