From the bed, a guest should be able to reach a clear surface, control a reading light, and plug in a device. Draw those elements with the mattress and bedding in place. Give each guest a separate control for reading and a clear way to switch off the principal lights before sleep.
Draw the things a guest puts down
Eileen Gray’s Adjustable Table E1027 takes its name from the house. ClassiCon’s published dimensions and images show its open base and adjustable frame, which let the top come close to the person using it. The pertinent question is how close a hand can get when an object rests on a towel, the mattress compresses, or the guest wants to reach a glass without sitting upright. ClassiCon, Eileen Gray’s Adjustable Table E1027
Sketch a drinking glass, charging cable, phone, and the hotel’s own control guide on the nightstand. A top fitted closely against the bed can leave the plug behind the pillow or route a cable across the only open edge. Place outlets where staff can see and reach them during a room check. Verify the usable outlet and control reach at the accessible bedside positions if the project sets them out. In the United States, the Access Board’s standards describe reach ranges and operable parts for covered elements. U.S. Access Board, Guide to ADA Standards, Operable Parts
Give both people a predictable light
In a 2008 hotel guest-room controls report for San Diego Gas & Electric, Theresa Pistochini, Kristin Heinemeier, and Daryl DeJean found that the bedside lamp received the most occupant use in the monitored lighting comparison. The result belongs to that equipment and sample. Have the hotel state what switches and sockets should remain available in each room mode. Put the guest charging outlet on a circuit that remains available during the room’s appropriate off or sleep mode. Test with a charger plugged in, particularly when a guest uses a master switch. Theresa Pistochini et al., Hotel Guest Room Energy Controls, 2008
At DIVE, GOLEM designed quarter-circle tables that let people sit side by side. In a hotel, the geometry to draw is the space between the body, mattress, tabletop, and light beam. Check how a person in bed holds a book and where a second guest’s line of sight sits. Test the strongest and weakest light settings with both bed positions occupied. A separate beam and a control that can be located by feel give each person more control over what reaches their eyes. Daven Wu, DIVE in Marylebone, Wallpaper*, June 8, 2026
Zoku’s operator lists bedside charging and describes what its reading and master lighting controls do in the Loft. Ask the hotel to make the same choices for the rooms it will operate. Locate the reading switch close to the reading lamp, away from a group whose controls are needed only at entry. Check the amount of clear top left when one guest sets down glasses and the other plugs in a long charging lead. Give the supplier the cutout and cable bend as well as the visible finish. Zoku Amsterdam, The Loft at Zoku Amsterdam
Before ordering the nightstands, give an unfamiliar user the same room instructions a guest will have. Let them enter, plug in a phone, switch between reading and room light, then turn the room lights off. Ask what they can still operate in the dark and what state the controls return to after the room loses power. Put the final switch positions and circuit behavior in the same specification as the furniture cutout.