GOLEMArchitecture·Art·Design

10.c.9How to choose an interior designer for an adaptable room or fit-out?

An adaptable room’s hardest moment can be the time between two layouts. The people changing it need to know which piece moves first, how the room can be used meanwhile, and where the displaced furniture goes. A designer can show that work by drawing both furnished arrangements and discussing them with the staff who will move the pieces.

Ask for the open room, the divided room, and the change

GOLEM’s account of SUPERZOOM describes a removable wall between the gallery office and a display area. For a candidate interview, ask for the opening and the same adjacent view in both configurations. Then ask the fabricator and building team what has to be checked about the wall, services, and any new storage. At Diriyah, by comparison, the length and position of the foyer sofa influence the plan while workshop tables elsewhere change for the program. The client can give the shortlist a mix of fixed and movable parts, including somewhere to put the pieces when they are out of use.

ISO 20887 places disassembly and adaptability in the design process, and USGBC’s interiors material includes future layout and reuse options. The client can make this practical by asking who can remove a panel, change a light or replace an upholstered module, using which tools and drawings. The appointment can set out who can operate the current layout without waiting for that work, and identify the staff member who approves the restored room. ISO 20887:2020, Design for Disassembly and Adaptability U.S. Green Building Council, Interiors Life Cycle Impact Reduction Guide

Reopen the room while a part is out of use

A member of staff can take one damaged or unused piece out of the room. The client can draw where it waits and how people continue moving around it. Then set out the fixtures that depend on power in each room state and confirm the route to the service point before furniture is added. The client can make an equipment plan of the largest item that needs storing and include enough time to get it there. The appointment can establish which control, latch, or light setting the first operator checks before the room can reopen.

Questions by project

How to choose an interior designer for an interior that can change without a full refit?

The designer can identify what remains, what moves during use, and what needs a contractor. At the first trial, the team can test two occupied layouts with the same main building services and record where the work would still interrupt operations. Take the occupied layout and the operating brief to Ariel André, GOLEM.

How to choose an interior designer for a divisible interior with partitions and storage?

A candidate can show drawings of the same room open and divided. The client can make the designer show the parked wall, stored pieces, and controls at the points people use them. The removable wall at SUPERZOOM gives the operator and designer a case to discuss when drawing the positions at which a room can be opened or separated. Review the partition storage and the occupied crossing route with Ariel André, GOLEM.

How to choose an interior designer for an interior using custom modules in more than one layout?

The interior designer can present two occupied layouts using the same inventory and usable clearances. Trace what happens at room edges, corners, and reachable work positions when modules regroup. Bring the room survey and the two uses to Ariel André, GOLEM.

How to choose an interior designer for an interior with everyday room changeovers?

The client can have the designer run one real changeover with the ordinary staff and equipment. The client can record both elapsed and staff time, identify the first obstruction, and assign the room release to a named role. Diriyah’s sofa, shared tables, and loose chairs are a precedent for deciding what stays during a change in use. Review the room and its working layout with Ariel André, GOLEM.

How to choose an interior designer for an interior using salvaged or repairable modular furniture?

A candidate can present a measured inventory in the room plan and have the designer show where unavoidable variation will go. The client can review the usable first arrangement and the stock available for a later repair. Ask how the interior could be tested with Ariel André, GOLEM.

How to choose an interior designer for an adaptable interior commissioned with its furniture?

The interior designer can present two approved furnished drawings and a written scope for the points where furniture depends on the building. Establish what the interior designer will check in the prototype and at handover. Commission an initial look at the layout with Ariel André, GOLEM.