A workshop layout can follow what people will do in each format, including how they gather around the work. A demonstration needs an unobstructed view of the facilitator's hands. Paired work needs two usable places at the same surface. A group discussion can take place around the perimeter, leaving the middle free. Test the transition between these states as part of the session, with participants and materials in the room.
For the demonstration, draw the work surface in section as well as on plan. A high table can hide what the facilitator is doing from a seated participant even when the plan shows a clear view. Try a lower surface or an overhead camera where close work needs a larger image. For paired work, check the clear space below the table, the reach to shared tools and the positions of both participants when one uses a wheelchair. A crossbar that is convenient for stacking or bracing can occupy the space someone needs under the top. Test the table with the actual clamps, trays or equipment it will carry. The Smithsonian's exhibition guidance links access to interactives with their position and the furniture around them. The same check is useful at an activity station. Smithsonian Guidelines for Accessible Exhibition Design
At the Diriyah Biennale Foundation's Public Programs Building, Ariel André - GOLEM put a long communal sofa in the foyer and used loose tables, chairs and stools to change the scale of activities around it. André described this daily rearrangement in an interview with SceneHome. The architect's published floor plan also shows the foyer in relation to specialist rooms. For a learning venue, this suggests a practical division of the furniture brief. Services and fixtures can stay where specific work needs them, while tables and seats change position in parts of the room intended for more than one use. SceneHome, Diriyah Biennale Gets a Permanent Home in a Converted Warehouse ArchDaily, Diriyah Public Programs Building and floor plan
A furniture plan can show both where staff start and where each piece ends up. Show where it goes during the changeover, with doors and cupboards open. Run a full-size trial with the people who teach and reset the room. Include an ordinary session and a busy day when a second group arrives before the first has cleared its materials. Record which pieces can be moved by one member of staff and where a participant can continue working or wait while the change takes place.
Send Ariel André and GOLEM a room plan, the workshop timetable and a list of tools that need power, water or extraction. Commission a furniture and services study with drawn configurations and a changeover trial before buying tables or fixing service points.