A guest checking in from a seated position needs a place where they and a staff member can complete the process together. At that position the guest can see the staff member, reach the payment terminal, sign or read a document, and keep a bag close. A low counter becomes hard to use if it is the place where the hotel stores the printer, welcomes a second party, or leaves a cart.
Draw both sides of the counter
For covered projects in the United States, section 904.4 of the 2010 ADA Standards describes two approaches to sales and service counters. The parallel approach generally requires an accessible portion at least 36 inches long and no more than 36 inches above the floor. The forward approach calls for at least 30 inches of length at that maximum height, with compliant knee and toe space. The relevant approach and any applicable exception should be confirmed against the project. In England, Approved Document M, Volume 2, §3.6 addresses approach, clear space, and hearing enhancement at reception. Its provisions should be read in their own regulatory context. The drawings must locate the clear floor area and casework at the same time. U.S. Access Board, 2010 ADA Standards, Chapter 9 Approved Document M, Volume 2, England, 2015 edition with 2020 and 2024 amendments
The tray, card terminal, and writing area should all be within reach from the accessible position. Ask the technology vendor where terminals can swivel, and which cables follow the movement. A document that can be slid across the desk is easier to exchange than one that has to be set down by a screen at the far edge. Draw the reception worker’s chair, waste bin, computer, and printer at the same scale. The employee also needs a workable approach to the desk and enough space to step out and assist. VisitEngland, Accessible and Inclusive Tourism Toolkit, serviced accommodation checklist
The Kellogg Conference Hotel at Gallaudet University lists a videophone-accessible front desk. Its service information points to a design consideration beyond the counter dimensions. Find out what communication equipment the operator will use. Put the screen or device so the guest can look at it and at the staff member. Choose lighting and a background that keep faces and hands visible. Ask staff to demonstrate a common request with the equipment where it is proposed. Kellogg Conference Hotel, accessibility features at Gallaudet University
The U.S. Department of Justice’s effective communication guidance distinguishes brief, straightforward exchanges, which may be handled by written notes, from more complex communication that can need another aid or service. Identify what staff can do at the desk when a guest asks a simple question and where they can continue an extended conversation. Test writing on the surface in front of the seated guest. A bag and card terminal can occupy the only part of the desk where someone can comfortably read and respond. U.S. Department of Justice, Communicating Effectively with People with Disabilities
Show the terminal and document positions on the millwork shop drawing. The millworker can coordinate the thickness of the accessible section and the depth of the cable enclosure with the knee space. On the guest side, a chair may need a straight path to the lower section or a place to park beside it. Keep that distinction visible on the drawing and confirm which position the contractor has built before storing equipment under the counter.
Make room for the second conversation
Someone paying or signing at reception needs space away from the head of the queue. A guest can keep a suitcase at their side while leaving the route clear for someone passing behind. Give staff a second place to continue a conversation about a room assignment or a payment issue. A nearby seat and small work surface may do the job in a small hotel, if staff can bring the right device there and conversations are hard to overhear.
A seated guest with a wheelable case and a second party waiting can show whether the reception layout works at full size. Have the first guest complete the actual transaction with a dummy booking and then release their place while the second guest approaches. Arrange for one employee to work both the regular desk and the accessible point during the trial. Approve the counter with the terminal in its working mount, the bag parked, and the lower approach clear. Have front-office staff perform the same exchange during orientation so they learn which equipment can leave that counter and which belongs there.