GOLEMArchitecture·Art·Design

07.h.1How do you design an accessible hotel bathroom and guest room that fit the rest of the hotel?

A guest using an accessible room needs enough space to get from the bedroom to the bathroom and use both without the furniture or doors getting in the way. Show where a guest approaches the bed, leaves a mobility device or bag, enters and closes the bathroom door, and reaches the toilet or shower. Use the same finish and furniture family as the rest of the hotel where it can meet these tasks, with each fitting selected for the required clearance, reach, and operation.

Coordinate the routes through both rooms

For covered US projects, the 2010 ADA Standards address scoping for transient lodging in section 224 and technical criteria in section 806. The applicable sections distinguish mobility and communication features. Where relevant, comparable vanity countertop space at the lavatory is explicitly addressed in section 806.2.4.1. In England, Approved Document M, Volume 2 addresses sleeping accommodation and bathrooms under its own system. Draw the openings, clear floors, and fixture relationships before the room schedule is fixed. Give the operator the precise feature information it needs to describe each room. US Access Board, 2010 ADA Standards, Chapter 2 US Access Board, 2010 ADA Standards, Chapter 8 HM Government, England, Approved Document M Volume 2, 2015 edition with 2020 and 2024 amendments

The former Hotel Brooklyn in Manchester, now voco Manchester, is documented by VisitEngland’s accessibility guide and the operator. The case describes a selection of room features including adjustable furniture and a ceiling hoist in particular rooms. The current hotel guide explains how a guest using the hoist reaches a mobile shower chair. Each piece depends on the rest of the sequence. Show who moves and uses the chair, where it stands while the shower runs, and which other parts of the hotel room remain reachable. VisitEngland, Hotel Brooklyn Manchester Accessibility ROI Case Study, 2023 IHG, voco Manchester City Centre, Accessibility Guide

Carry the detail through the fixtures and finishes

At the Diriyah Biennale Foundation’s Public Programs Building, GOLEM designed workshop storage and points of access for users including children and adults. In a hotel, the same attention to different users can carry through the room’s actual fittings and storage. For a hotel project, select the bathroom vanity within the same design family as other rooms and detail its usable front edge and supporting construction in the section. The surface and clear space have to work with the basin, drain and fittings in place. Diriyah Biennale Foundation Public Programs Building / Ariel André-GOLEM, ArchDaily, 2026

From the shower seat, a guest should be able to reach a towel and operate the control before the water starts. Show the part of the rail or basin front that can be gripped and the depth of the usable surface beside the basin. When the project uses a seat or a rail that can be moved, write who places it before arrival and where it goes when the room is cleaned. Keep the bathroom-view photographs up to date with the installed fittings and have someone who has not seen the room review them for legibility.

People who use wheelchairs and people who use the room with a companion can test different ways of using the same layout. Close the bathroom door and put towels and toiletries where staff will actually leave them. Use the real shower control and screen where possible. A clear floor rectangle can be compromised by movable equipment the drawing treats as absent. Ask housekeeping to show where a seat or bin is returned during room turnover, and record the position on the room setup sheet.