Diners along a communal table need enough light to read a menu, see the food and recognise the person across from them. The scheme needs light on faces as well as on the horizontal surface. Set the height and spacing of fittings from seated views and from the actual table setting. Provide a separate scene for clearing and cleaning. When the table changes size, check which parts of it sit between beams or directly below a bright source.
An attractive room and a usable table
Laurie Wu and colleagues studied the effect of focal and general lighting in images of restaurants. The online experiment with 576 US adults elicited judgements of attractiveness and willingness to approach. The reported advantage for focal lighting applied in the study's high-relational-intimacy scenario. It makes sense to distinguish diners who arrive as one party from people booked at adjacent positions on the same table. That is evidence about how a room reads before someone sits down. A bright pool at the centre of a long table can make it legible from the entrance, yet leave one end difficult to use. The study's measures are different from being able to read a handwritten menu after sitting below a pendant. Laurie Wu, Zeya He, Ceridwyn King and Anna S. Mattila, In Darkness We Seek Light, 2021
Robson and Kimes changed the lighting spectrum in an operating restaurant and studied purchasing and time at table. Under the conditions of that study they detected no difference in purchases or time at the table. The question concerned a particular lamp replacement, and it is useful beside an experiment about image judgements precisely because it measured different things. The operator should decide whether the brief asks people to spot a communal table on arrival, read across it or see it set for dinner. Each aim can be examined directly without assigning a sales effect to a lamp catalogue. Stephani K. A. Robson and Sheryl E. Kimes, Examining the Effects of Full-Spectrum Lighting in a Restaurant, 2007
Light the other side of the table
At Noma in Copenhagen, Architectural Record describes Jonas Edvard's seaweed pendants following a 20-foot smoked-oak communal table in the private dining room. BIG worked on the architecture and Studio David Thulstrup on the interiors. The table has a known position and the fittings can be placed in relation to it. The same report describes the windows and skylight in the main dining room. The spaces put different demands on the lighting plans. A fixed row of fittings can trace the geometry of a permanent table. If the operator separates the same table into smaller units for lunch, check where the outside settings fall after the first move, when the daylight and ceiling arrangement may point to different positions. Architectural Record, Noma by Bjarke Ingels Group and Studio David Thulstrup, 2018
A pendant that lights food from above can leave eye sockets and the lower part of a face in shadow. A pale wall receiving light can make some seats more comfortable, as can a fitting with controlled lateral light. The person looking along the table has a different view of the fittings from the person directly underneath one. On a glossy table, a bright source can also appear as a reflection across the place where a menu sits. Locate the fittings in a section that includes seated eyes, the top and likely reflective objects. Put a tall bottle, a glass and a plate on the mock-up and vary the dimming level, including the lowest value staff will use.
The International Commission on Illumination's colour-fidelity method describes how a sample of colours appears under a test light relative to a reference. It gives the lighting designer a way to discuss the specification with a supplier. In a restaurant, the operator can compare a cooked dish, skin tones and dark-stained timber under the actual lamps and controls. A high score for colour fidelity cannot resolve a reflection in a particular glass. Check the two problems separately, under the glazed or reflective finishes the room will actually use. CIE, Colour Fidelity Index for Accurate Scientific Use
Who controls the change in light
When a table seats two separate bookings, they may arrive in daylight and leave after dark at different times. Put the switching and dimming in the hands of the duty team and give the floor staff a way to request a small adjustment while seated guests are present. Decide whether the lights that people can see from their chairs should change when the lights above the pass go to cleaning level. In a room with movable tables, a continuous track or individually addressable fittings can accommodate the furniture positions the operator expects. A fixed pendant can suit a permanent table whose surface and seating locations are established.
During the evening trial, read the menu at each end and speak to the person opposite without using a phone for light. Put one member of staff on the service side with a tray. The design team should record which fitting caused a reflection and where a face went into shadow before altering the scene. Once the preferred scene is established, ask a person who was absent from the trial to set the lights for a staged dinner and then bring up the cleaning scene. Record the controls in the same terms that person uses. The useful lighting design includes the fitting that can still be shielded and the switch that a new duty manager can find.