A section through both the stool and the counter shows how a diner will sit and reach the plate. Seat height, foot support, back support and the overhang determine how the diner approaches a plate. Give the counter a dining-height place with an accessible approach and an equivalent view where the format permits. Allow enough width at each setting for a meal and a guest's belongings. A stool that is tenable for a glass of wine may become uncomfortable over several courses.
Draw the person underneath the counter
Start from the working height of the rim of the plate. The distance from the seat to the tabletop can change with the thickness of the stool cushion and the height of a bowl. Where knees go below the top, the fascia, pipes and reinforcing brackets have a direct effect on posture. A lifted footrest can give one person firm support and force someone taller to bring their knees towards the underside of the counter. The Canadian Centre for Occupational Health and Safety's seating guidance is about work chairs, with the practical observation that feet need support and the seat should suit the person. At a restaurant, where stools rarely adjust, a foot rail, a rung and a dining-height seat can provide different ways of getting that support. Canadian Centre for Occupational Health and Safety, Working in a Sitting Position, Work Chairs
Look at how a guest gets onto a stool from behind. A foot rail attached to the counter is of little help while they mount. A seat with a back affects the path to the stool beside it. If chairs swivel, map the area occupied by knees and heels at the point of rotation. A low stool with a back can suit a diner who wants to sit through a longer meal. Where the counter is so dominant that regular tables feel remote, a lower segment can keep that guest in the same line of service and able to see what happens behind the top.
At RAMA in Tokyo, MMA's project record describes nine seats around a curved cast-stone counter and an oak strip at a lower level. The strip gives a diner somewhere to rest an elbow or put a phone, and keeps that lateral use apart from the serving surface. A change of level can preserve the depth of the working top and give the guest a visible place for personal objects. The radius of a counter also determines the available width at different distances from the edge. In reviewing a curved design, mark each guest's hands, elbows and knees at the same time. Check the inside corner or the tightest part of the radius before averaging dimensions across all seats. MMA, RAMA Restaurant, Tokyo, 2019
A dining place and a point of service
The US Access Board's advisory to section 902 explicitly includes bars and lunch counters among dining surfaces. Sections 226 and 902 describe scoping and the required approach, including a top 28 to 34 inches (710 to 865 mm) above the floor in covered US projects. Section 227 covers sales and service counters as a separate facility. That distinction matters when a restaurant combines ordering, collecting food and eating along the same length. The person arriving for a meal needs the relevant dining position as well as a way to order. US Access Board, ADA Standards, sections 226 and 227 US Access Board, ADA Standards, section 902
In England, Approved Document M Volume 2 discusses wheelchair-suitable portions of bars and serving counters within its guidance on refreshment facilities. It is a separate reference, with its own scope. In a project that uses it, the architect can review the proposed dining and ordering positions together with the access consultant. The same position should also be tested in relation to the hot pass, the chef or other activity it is intended to face. Approved Document M, Volume 2, Refreshment Facilities
A connection between the low and high positions calls for a cut through the join. The guest's outlook can change at the point where the top comes down to dining height. A fascia at the high counter's edge may now screen a seated guest from the chef. The serving surface staff use on that side can also be at a different height. Work out whether dishes cross the counter there and how the worker reaches them. At a very narrow counter it may be better for the server to approach from the end, with the same place and tableware still in view.
The operator can reduce demand for depth at the counter by specifying a place for coats and a serving sequence that clears dishes before the next arrives. That has limits. Load the corner position with a plate, a side dish and a filled glass, then serve to it while both adjacent stools are occupied. If a server has to use another diner's setting to put down the plate, the deficiency is in the counter or its spacing. Record the position of the server's hands and the guest's knees before changing the geometry.