A restaurant can keep service predictable by retaining its main service route and moving only the tables and chairs within a defined area. Plan the arrangements with the people who accept group bookings. For each, account for the tables it takes out of use, the time to make the change and the positions staff need to continue serving. A group layout made before a sitting has different consequences from moving tables while the neighbouring diners are eating.
The cost of waiting for the next table
Gary Thompson compared dedicated and combinable tables in a simulation of walk-in restaurants. Two small tables can seat independent parties at one time and a larger group at another. To join them during service, both have to be free. One table may stay vacant while the party beside it finishes, even when it could otherwise seat another walk-in party. The simulation found advantages to combinable tables under some conditions and an advantage to dedicated tables under others. A follow-up paper examined which specific tables to make combinable. Together they give operators a way to calculate the holding time as well as the movement time. Gary M. Thompson, Dedicated or Combinable?, 2003 Gary M. Thompson, Optimizing Restaurant-Table Configurations, 2003
Distinguish the group booked before opening from the party that adds people in the course of a sitting. A corner already booked as one unit can be set for a group without moving furniture through the room at peak time. A second arrangement might accommodate additions to a booking at one end of the table, with a leaf or a small adjacent table. Give both arrangements a known seat count. A walk-in group can be offered whichever configuration staff can make without holding too many active tables out of use.
What the furniture leaves behind
For Brick Restaurant, Nebbia developed an Elemental Table with aluminium channels and adjustable leg positions. Its design record gives a reason to look beneath a joined tabletop. A pair of legs at each joint can remove the most useful places along a long table. Ask the furniture maker for a drawing that shows which legs travel and which are fixed, then sit at the seam. A second detail shows how the two edges meet, including where tables can be levelled on an uneven existing floor. Put drips from a glass and a knife beside the joint before deciding how important the seam is. Nebbia, Elemental Table for Brick Restaurant
Supplier Casala's record of a Paris staff restaurant by Atela Architectes describes round and counter-height tables alongside an area with folding tables, stacking chairs and transport trolleys. It is a workplace restaurant. The relevant detail is that the moving stock belongs to one part of the room and has its own equipment for handling. A restaurant can use that distinction when furniture arrives in a group configuration. Decide where surplus chairs go and which staff member can move them, then make the route to the store part of the furniture purchase. Casala, Paris Staff Restaurant, Atela Architectes
There is a version of the change that needs neither a spare table nor a move after guests arrive. A set of tables can be pushed together in the morning and have two adjacent positions kept clear until the operator knows how many guests are coming. A small extension at an end is another treatment of the uncertainty. Compare both with the location of the service point when all chairs are in use. The additional seats might make a table long enough that a server needs to approach both ends. An access route around the group and a practical approach while hot dishes are on a tray give two dimensions to check. In covered US projects, the accessible-route provisions have their own widths and exceptions. A restaurant has to account for the extra movement required by its service even where that route meets the standard. US Access Board, ADA Standards, Chapter 4, Accessible Routes
A floor plan for joining furniture should also give the crew something to retain at handover. In a room laid out nightly, a discreet change in the floor or a coordinate on the plan can show where the ends of a table should land. The team need usable wheel or glide details and a way to carry a joined leaf without lifting it above someone else's order. Ask the manufacturer which alterations can be made by one person and which require two. Record the staffing assumption on the group layout. A configuration the operator can prepare before opening with two people may be unavailable on a midweek shift run by one.
The operator can identify the group arrangement most likely to test the room, and the designer can draw it beside an occupied neighbouring table. Follow someone carrying dishes to it and someone clearing from the far end. Record which configurations are available to the booking team in advance, which require a period of holding tables free, and which are infeasible while service is under way. The staff's acceptable change time and the customer's time at the table belong in the same decision.
The DIVE project account describes tables with quarter-circle tops that can be paired or grouped in fours. A restaurant can test that principle by laying out both combinations on its own floor during an occupied service. In the group position, a server can carry the largest dish to the furthest seat and check where glasses are put down across the joined edge. In the smaller arrangement, the chair facing the aisle should still leave the route needed to clear dishes or move the tables apart. The two arrangements can help establish the size of a module that works with different groups.