GOLEMArchitecture·Art·Design

06.c.1How do you design a bar counter where guests can eat, talk and watch the service?

The depth and height of a bar counter have to work for the guests on one side and for the people serving them on the other. On the guest side, people need enough room to eat and to turn towards a neighbour. On the working side, staff need short reaches and room to use the equipment through a whole shift. Decide which preparations guests should be able to see, then place those actions at the counter. Provide another surface for work that needs its own space, especially when one person is serving and another is clearing.

Between the plate and the ice well

A guest at the counter experiences two different depths. The first is usable space from the edge to a glass or a plate. The second is the distance to the person setting it down. An unusually deep top can look generous and require a server to lean across it on every order. A narrow top can put a dish over a foot rail or a hand within reach of the wet working edge. Draw the underside as carefully as the horizontal surface. The counter's structure, sink and apron can each take away some of the space that allows a guest to move close to the food.

In a field study in one British Columbia pub, Troy Jones, Megan Strickfaden and Shrawan Kumar examined the physical demands on bartenders, waiting staff and cooks. The study considered repeated work and body position in an existing establishment, with 17 participants across roles. OSHA's guidance for restaurant servers also identifies repeated reaching across tables as a risk. At a counter, the placement of the most frequently used bottle, glass or pickup tray will matter more to the working section than the reach someone makes once a shift. A design review can put time next to distance. Loading the same shelf repeatedly at the busiest point of service is an informative test. Jones, Strickfaden and Kumar, Physical Demands Analysis of Occupational Tasks in Neighborhood Pubs, 2005 OSHA, Young Worker Safety in Restaurants, Serving

A position from which to watch

Kiln in Soho has seats facing its open kitchen, with wood-fired cooking behind a stainless-steel counter. Contemporary trade coverage credits the approach to restaurateur Ben Chapman working with designer Dan Preston. The counter makes a particular part of preparation available to the person eating. The kitchen still has to draw heat and fumes away from the occupied room. The distinction is visible on a section through the cookline. The chef may be close enough to talk, while the hood and the working surface are built to handle hot equipment at a fixed point. A cocktail venue can use the same principle by placing the preparation it wants people to see at a workstation away from the glass return and the pickup route. Hospitality Interiors, Ben Chapman to Open New Soho Restaurant We Heart, Kiln Soho

Opposite a working surface, the most interesting seat may also be the one nearest the blender, tap or extractor. A concerted test of one full order will tell more than a drawing of equipment switched off. Give guests an equally visible place further along where they can continue a conversation. If the length of the counter changes height, carry the view and service to the lower part. The US ADA Standards distinguish a dining surface at a bar from a counter for sales or service, each with its own scoping provisions for covered work. The guest who comes to dine needs a dining position they can use with their party. US Access Board, ADA Standards, Chapter 2, sections 226 and 227 US Access Board, section 902, Dining Surfaces

An open counter can reveal part of the work without requiring the operator to carry every preparation into view. A dish may be finished at the front when diners expect to see the cook, while used plates travel beside the waiter's station to another landing further along. The division can be drawn in section. Use the change between the wet working section, the dry pickup surface and the diner-facing edge to decide where tools or a filled tray are set down. A splash guard placed to protect a guest can still let them watch a cook if the seats are at the right height. Check where a shorter guest can see through and where the server can exchange a plate without standing on a footrail.

At the mock-up, seat two people who intend to have dinner and a third who only wants a drink. Simulate a drink pickup for a table elsewhere in the room while plates are cleared. Any crossing between hands, hot plates and dirty glasses belongs on the drawing before the section is fixed in stone or timber. The operator can then decide whether the answer is another landing surface, a different workstation or one fewer seat at that length of counter.