A speaker plan should begin with the seats the system is intended to serve, at the actual positions and heights of the listeners. A stereo listening setup has a position from which the left and right sound are intended to balance. An even supply of music across a bar is a different design task. Select the intended distribution before fixing loudspeaker positions, furniture or mounts. Mark the person standing at the bar as well as the person sitting nearest the speakers.
A pair of speakers and a listener
Genelec's studio guidance gives an example of close stereo listening. It places the left and right speakers symmetrically, directs the acoustic axes towards the reference listener at ear height, and uses a 60-degree angle at that listener. The ITU-R recommendation on controlled assessments of audio quality likewise defines a reference listening arrangement. Both concern specific listening tasks. In a bar that wants to make a stereo image available to several people, the designer has to decide what happens to the image at the side seats and whether those positions are still intended for close listening. Someone sitting very close to one loudspeaker hears a different balance from someone centred between both. Genelec, Studio Monitor Placement ITU-R BS.1116-3, Methods for the Subjective Assessment of Small Impairments in Audio Systems, 2015
The wall behind a source and the surfaces near the listener are part of the sound field. Floyd Toole's work on loudspeakers and rooms concerns the influence of direct sound and reflections, while Cox, D’Antonio and Avis consider the effect of room size and positions at low frequencies. In a small space, moving a bench or moving a speaker off a wall can change which frequencies are reinforced or cancelled at an intended seat. If the sound is weak at a place beside a boundary, raising the volume may make another place louder while leaving the local problem. Set aside time to assess alternative locations before a cabinet, bracket or wall recess is fabricated. Floyd E. Toole, The Acoustics and Psychoacoustics of Loudspeakers and Rooms, 2006 Trevor Cox, Peter D’Antonio and Mark Avis, Room Sizing and Optimization at Low Frequencies, 2004
Measure and listen from the positions people actually use. A proposed reference seat might be on the main axis, two metres from both loudspeakers. A fixed corner seat only a little further away can be much closer to one side and to a nearby boundary. Have the system designer compare locations with the proposed mounting in place, before ordering built-in furniture. For a bar programme that includes stereo replay, check several recordings at those positions and document where the balance shifts. If a second area is intended for even background sound, specify its listening test separately. The speaker's visibility is one piece of information about the route sound takes.
The seats away from the centre
JBL's guide to ceiling speakers draws coverage at a listening plane. The area reached at seated ear height and the area reached by a system serving standing guests can differ even with the same speakers. Combine the angle on the data sheet with the distance to each listener. Overlap and distances matter where one seat is directly under a unit and a second is on the edge of a coverage area. Model the plan with the proposed equipment and measure it in the installed room. Low seating, partitions and beams can affect the distribution. JBL Professional, Ceiling Speaker Application Guide
At TOH in Shibuya, Tokyo, TORAFU ARCHITECTS describes seats around the DJ counter and custom OJAS loudspeakers overhead. An opposite counter sits beyond a central seating area. The project record credits collaboration with Misako Kidokoro and sound work by WHITELIGHT and Luv Works Sound. The drawings give the loudspeakers a concrete position relative to the furniture. In a different bar with a low banquette, a person seated at that height can hear the nearest speaker along a path that crosses the heads of standing guests. Check the section with part of the audience up and part sitting. The listening map should record which positions are intended to hear a stereo pair clearly and where the system designer may want a lower-level or separate fill to meet a different brief. TORAFU ARCHITECTS, TOH, Tokyo, 2025 Architecturephoto, TOH
At commissioning, record what is heard at the intended listening seat, at both edges of the next row and at the place where the bartender takes an order. Include the paths people use while moving. A gain setting picked at the reference chair has to coexist with the staff member who spends a whole service under the sound system.