GOLEMArchitecture·Art·Design

09.c.2How do you choose the size of a furniture module for different groups and room layouts?

A furniture module needs enough room for the people and objects it holds on its own. When two modules come together, chair backs, legs, and seams can reduce the edge people can actually use. Comparing occupied layouts for the groups the venue already serves can show what dimensions work, including for the smallest group.

Count the useful edge

At DIVE in London's Marylebone, Ariel André and GOLEM designed quarter-circle tables that let pairs sit side by side. According to GOLEM, the tables can be joined to seat up to twelve people. In Wallpaper, the band of structural arches is part of the account of distinct seating bays. Take the shape and the room together. On a new project, a curve that gives two people adjacent places may put the opening between tables just where four guests want to set down a shared dish. Draw where people can sit comfortably with the tables joined. Mark the gap between the tops and the amount of edge still available after joining them. Wallpaper, DIVE, 8 June 2026

Gary M. Thompson's research on combinable restaurant tables considers what happens when a venue keeps a table free while it waits for the adjoining one. That makes the likely groups a question for bookings as well as design. Pull the last month's party sizes or class registrations before deciding which combinations to prototype. If many groups arrive in pairs, make sure a single unit has a good location when each neighboring unit is occupied. If a party of six needs tables from two other groups, test that combination on paper with the host before assigning it to the room as a routine option. Gary M. Thompson, Cornell Hotel and Restaurant Administration Quarterly, 2003

Check the section with the top fully occupied

For the Studio Youth at the Diriyah Biennale Foundation’s Public Programs Building, Ariel André and GOLEM designed curved modular tables for individual and group work. The studio serves children and teenagers from ages 3 to 17. Test a comparable layout with an individual drawing and a group project that needs a shared tray. Mark the edge a child can reach from their seat, and leave room for an adult to approach a group without asking someone to stand up. ArchDaily, Diriyah Biennale Foundation Public Programs Building, Youth Studio

The Human Factors and Ergonomics Society's guide to anthropometric data begins with the work a person has to do, then identifies the body dimensions relevant to that task. In its seated workplace example, it uses separate measures for the thigh and knee below a surface and for the depth of the seat. The British Health and Safety Executive also recommends putting frequently used items within reach and allowing space for people to change their posture. In a workshop, put the sample trays, drawings, or tools used together on the actual top. Ask someone to take notes while a second person reaches for a sample. A deeper top may hold better stock of materials but can make a tray at the far edge harder to reach. Human Factors and Ergonomics Society, Guidelines for Using Anthropometric Data in Product Design, HFES 300 Health and Safety Executive, Reducing Awkward Postures

Kutztown University's classroom design guide gives different spacings for different seating and work surfaces. The drawings follow the piece of furniture used for the teaching format. A study by H. I. Castellucci and colleagues in 18 schools in Valparaíso, Chile, found mismatches involving seat height, desk height, and the space between them. It concerns schoolchildren and the furniture they used. A venue can use the same attention to each dimension when one furniture family serves people with different bodies. Try the intended chair with both tables. A seam rail beside a corner leg may affect knee clearance even when both tops have the same height. Kutztown University, Design Guidance: Learning Environments, 2013 H. I. Castellucci et al., Work, 2016

Approve one drawing for each group size

In a proposed studio, use tape to mark two candidate module widths at full scale. Give a pair one unit and put a drawing board or a typical tray in the position it will occupy. Move a second unit against the first and set up for four. Keep a chair pulled back at the end and walk past it while carrying the largest object that regularly comes into the room. Record where the largest group can leave space for that movement and where the first person can sit when only one unit is in use.

On that test, set out two 18-inch trays side by side. A 36-inch top fits their nominal widths. Try lifting one tray by its handles with the other in place and measure any extra space the hands require. Repeat with the table rotated and a clear edge for loading. If a narrower module works with the second orientation, record how the users will approach it on the drawing. The extra inches on the first module and the different layout of the second are options the client can price together.

The fabricator needs the smallest usable work surface, the maximum outline with people in place, and a section through the seam that controls how the pieces meet. Where the frame narrows the space between two places, mark the minimum clearance with the actual hardware. Ask the operator to approve the one-unit arrangement and the joined arrangement using that same sample before procurement compares prices.