GOLEMArchitecture·Art·Design

09.e.4What should a furniture inventory record so a technician can find a usable spare?

A technician looking for a spare needs to be able to go from the label on the damaged unit to a part that fits. The inventory should connect the asset number, model, and production revision or date to a specific spare, the evidence that it fits, its condition, and the bin where it is kept. The technician can then check compatibility before carrying the part to the room.

Start with the label the technician can see

Herman Miller's service instructions ask for a photograph of the product label or for the model, manufacturing date, and factory order number. The Japanese manufacturer Kokuyo asks owners to prepare the product and lot numbers and gives examples of label locations. Photograph the maker's label when recording the asset, since the original mark may sit below a seat or worksurface after installation. Put the local identifier where staff can read it in place. Enter the maker's number into a separate field. A room reassignment changes the local location record while the production information stays with the object. Herman Miller, Warranty and Service Kokuyo, Office Furniture Repair and Purchasing FAQ, in Japanese

The UK government's Facilities Management Standard 002 includes an asset identifier, floor, room or zone, condition, and survey date among its core data fields. For a furniture store, extend that pattern to the stock location. A single store may need only a room, rack, and bin. If objects regularly move among sites, GS1 provides separate identifiers for physical assets and locations. Give each kind its own field so a location can change independently of the part number. Record which person can authorize a move and who can verify that a part has reached its new address. UK Cabinet Office, Facilities Management Standard 002, Asset Data, sections 4 and 5 GS1, General Specifications, Asset and Location Identifiers

Give the spare its own condition and fit record

When an order relies on the maker's identification system, check which accessories the maker identifies for that model. Vitra's spare parts catalog directs requests for items outside the listed range to a partner. Record that contact next to the part number. For stock already held on site, add a photograph of the feature that determines fit, such as the face of a locating bracket with a scale beside it. File the drawing revision or fit check that supports the match. Put a date against the inspection, especially if the part came back from a room where a defect was being investigated. Vitra, Care and Repair, Spare Parts

For a part that looks the same in several versions, give the register a field for the distinction staff can check at the shelf. The handle of a latch may look identical across two revisions while the mounting face has moved. Photograph that face from the fitting side, with the screw centers visible. State whether the kit includes the screws and mating plate. A complete kit and a single latch from a dismantled unit can live in the same store with different identifiers and quantities.

ISO 59040:2025 describes a product circularity data sheet for exchanging information about a product. Where a supplier supplies that sheet, link it to the model record. The technician still needs to know what has happened to the particular piece since it came into the store. Put the inspected quantity and the reserved quantity next to one another. Give a repaired part a new inspection before marking it ready. Keep parts with unresolved identity or condition in a holding location and label the bin with the same status shown in the register. ISO 59040:2025, Product Circularity Data Sheet, Scope

Time a retrieval with the store as it stands

Replacing the left-hand hinge on cabinet F-012 gives the technician a job to try using the inventory. Start with the label on the installed cabinet and see whether it leads to the right revision. At the rack, ask which spare is ready and which has been held for a separate repair. Put the retrieved item beside the reference fitting and check the dimensions that affect installation. Record where the technician had to leave the register to ask someone a question. An address that says “workshop” may need the rack and bin. A photo of the outside of the cabinet may need to be replaced with a view of the two hinge variants.

The storekeeper can log the withdrawal and check the remaining quantity at the bin. When the technician returns the damaged part, change its status and record whether its next stop is repair or assessment. Ask a colleague who has never used the register to repeat the job on another unit. Facilities management can then set the frequency of stock checks by looking at the difference between the physical count and the entries staff used to retrieve the spare.

Run the same check during a shift when the central store is closed. If the service brief requires a repair that evening, give the duty manager access to an inspected reserve and record the withdrawal against its own location.