GOLEMArchitecture·Art·Design

09.c.4What makes a modular furniture joint easy to assemble and take apart in a furnished room?

An installer who needs to remove one module in a furnished room needs space to stand, get a hand or tool to the fixing, and move the released part out. The detail should show the adjacent units and finishes in place. If the operator expects to repair the middle section of a bench independently, the joint has to release with the other sections still installed.

Draw the tool path and the way out

A screw may need a driver in line with its head. A concealed catch needs room for a hand to reach it and pull. Put the actual tool and the hand on the section, then draw the space the released part needs to leave the assembly. For a bench against a wall, check both actions with the upholstered thickness in place. A seat pad might lift free of its screws and still catch on the backing panel as the installer draws it forward. Mark one place where the pad can rest while the fixings are checked.

The Design Museum describes IKEA’s wedge dowel as a ribbed connector that clicks into prepared holes without tools. The useful question in a furnished room is how the pieces will disengage. Test that movement on the actual joint and with the neighboring unit pushed up to it. If the piece needs to pull sideways, show what makes that movement available. That might mean moving one loose end unit, which is manageable if its storage position and route are already clear. Design Museum, Wedge Dowel, California: Designing Freedom, 2017

MUJI’s bilingual stacking shelf instructions use an assembled basic set before making the connection to an add-on and call for two or more people for assembly. Draw the second person, especially where the cabinet meets a wall or queue of stored pieces. One person can need both hands to keep a component aligned while the other brings the fixing into position. A person shown as a dot on the room plan may occupy the same place as the part they must lift. Check the movement with both people there. MUJI, Stacking Shelf Add-On assembly instructions, 2025

Leave the opener in reach

The EU Ecolabel’s furniture criterion 9.4 asks for instructions with diagrams showing how covered products can be assembled and disassembled with basic tools. The Interreg North Sea circular furniture guide recommends locating connections so they can be worked from one side where possible. Its example of the Magis Costume sofa shows elastic loops that release the upholstery from the base. A similar connection can save moving a complete piece if the cover can actually pass around the finished frame. Ask the supplier to mark the order of release on the drawing and try the first loop or seam with the full upholstery on the sample. European Commission, EU Ecolabel furniture criteria, Decision (EU) 2016/1332, criterion 9.4 CEO Interreg North Sea, Circular Furniture Design Guide, pp. 47 to 50

Kewlox publishes an assembly demonstration for its standard cabinets, which go together without nails, glue, or screws. Its FAQ identifies drawers and wall-hung furniture as exceptions. Ask a supplier for the demonstration that matches the assembly on the drawing. For a cabinet with add-ons, show whether each one has to come off first and where it goes during that work. Put these steps on the maintenance instructions for that configuration. Kewlox, cupboard assembly demonstration Kewlox, FAQ, assembly exceptions

For GROS BEAD, Ariel André and GOLEM use the same assembly principle across a family of five chairs. A primary metal frame supports the wooden beads. A second metal structure draws them together into a continuous seat and back. Draw these layers separately when detailing furniture with a tensioned surface. Mark which connection holds the surface in tension and where the installer would support it before releasing that connection. Show the path the released part would take with the furniture in its usual position. GOLEM at Paradise Row, project sheet, p. 23

The maintenance drawing should show the first fixing or part a fitter can actually reach. For a middle seat, that could be undoing a marked cover, then supporting the panel before loosening a connection. Record what must happen to stored objects or cushions that are in the way. The instruction should name the supports that stay in use while the joint is open and identify a replaceable fixing by its part number. Leave the furniture maker space to illustrate one complete sequence as part of the tender return.

Remove a middle piece in the prototype

Mesut Uysal and his colleagues compared seven joint types in simple wooden chair frames under repeated front-to-back loading. The work gives a reason to check strength and durability alongside disassembly. Their results concern the specimens and loading in the study. Ask the supplier for test evidence relevant to the configuration being ordered, then use the removal trial to see how an actual joint can be taken apart and put back in the room. Mesut Uysal et al., Materials & Design, cyclic durability and disassembly of wooden chair frames, 2015

For the trial, put the test unit among two neighboring pieces and leave any contents that can normally stay. Have the people who will do the work take out a central part using the tools they will have. Record who holds the released weight and where they put it down. Reassemble it and check the fit with the specified surfaces and fasteners in place. Ask the operator and installer to approve the demonstrated sequence before ordering the whole run.