GOLEMArchitecture·Art·Design

09.d.3How can staff move furniture while part of the venue stays open to the public?

When staff have to move furniture while a venue stays open, a plan of both routes can show where a loaded cart can stop clear of visitors and which doors and crossings can stay in use. The crew needs to know who controls any shared crossing and where to stop if someone needs to pass. A rehearsal while the affected area is closed, using the actual cart with a representative load, gives the venue team a basis for deciding which moves can take place during opening hours.

Follow the load through each doorway

Kyoto Art Box's exhibition maker's guide asks staff to check widths and heights between the loading entrance and exhibition space, as well as floor conditions and slopes a cart will cross. The user guide for the Civic Gallery at Kawagoe City Art Museum directs installation and removal through the gallery's loading entrance. Put that decision on your venue plan before assigning staff. A separate service door may put the move clear of visitors at street level while a shared elevator or a door on the receiving floor brings the paths together again. Kyoto Art Box, Exhibition Maker's Guide, vol. 02, section 4, 2025, in Japanese Kawagoe City Art Museum, Civic Gallery User Guide, loading and unloading, 2024, in Japanese

Follow one load through both doors of the trip. At Osaka Merchandise Mart, the venue's east elevator listing gives a 2,350 mm dimension in the car schedule and a separate clear entrance opening of 1,650 mm wide by 2,100 mm high. A cart has to fit through the door before the larger car dimensions can help. On a proposed route, measure the cart at the parts that extend furthest, including handles and overhang from the furniture. Draw its turning path by the elevator. Show the position of the operator on the receiving floor, with enough space to bring the load out while somebody is waiting for another elevator. Osaka Merchandise Mart, Carrying In and Out, east elevator specifications, in Japanese

The cart’s wheel path and the outline of its load need to appear on the same plan. On a long trestle table, the front edge can swing into a doorway before the wheels reach it. Run the loaded cart around the turn with the door held in its normal position. Where the crew needs to open a second leaf or turn the table, identify a place the whole load can stand clear of both doors. Put that position on the drawing with the receiving worker who can open the door.

Give the cart someplace to wait

Great Britain's Health and Safety Executive advises keeping visitor routes clear to avoid pinch points. Its guidance on moving wheeled racks and roll cages identifies risks from slopes, trapping, and overbalancing. Apply those observations to the cart and floor that will actually be used. If the travel route descends to a door, find a level place from which the crew can wait and see when the crossing is clear. Show the pause with the load in place. A cart stopped across the opening can occupy it for much longer than a cart passing through. Health and Safety Executive, Crowd Controls Inside the Venue, Great Britain Health and Safety Executive, Handling Roll Cages, Wheeled Racks and Other Heavy Units, Great Britain

The Smithsonian's exhibition design guidance calls for a visitor circulation route people can recognize and follow in good light. Draw that route through the occupied part of the building while the cart is parked and again while it crosses. In a gallery with two rooms open, the clearest place to store a folded table might be the opening from which visitors usually see where to turn. Try the move with somebody approaching from both directions, including an approach at seated eye level. Check that the directions can be understood from both sides of the door and keep the visitor onward path legible throughout the move. Smithsonian Institution, Guidelines for Accessible Exhibition Design, Circulation Route Guideline B

Mark where the crew holds the move

In a proposed rehearsal, have one attendant stand at the shared crossing and give the crew a clear pause signal. Send a member of staff through as a visitor while a loaded cart approaches. Use the place marked on the drawing to hold the cart until the pedestrian route clears. Run the sequence again with people coming out of the room as a group. The crew should be able to wait with the load away from the visitor path. If that space only becomes free after a second cart has moved, put the two moves in order.

The duty manager needs to see which moves can happen during a normal shift and which need a later slot. If a required escape or accessible route would be interrupted, have the responsible venue, access, and fire teams confirm a workable approved arrangement or schedule the move when the affected area is closed. Mark who makes the call and where the furniture stays until then.