A designer can test modular furniture by drawing two arrangements the venue will actually use, with the same pieces on the same room survey. Both plans should show the doors, built-ins, and routes the room depends on. Each movable piece needs a place to work and somewhere to go when it leaves that position. The connections that recur help determine the shapes of the pieces, including the free edge someone uses and the end that finishes a group.
Draw where the room sets the shape
At the Brussels apartment where Ariel André and GOLEM installed AMOREBA, a custom 3D tool lays out repeated upholstered elements on a site-specific surface. The seating pit is shaped around a particular room and a second use. Its void takes a standard double mattress, and the steps approaching it also hold large books. The number of repeated pieces is a question for making the fit-out. The dimensions of the pit allow someone to change how it is used. In Architectural Digest Middle East, Kieron Marchese compares this method of making something for a specific room to GOLEM's quarter-circle tables, whose owners can rotate and regroup the pieces themselves. Kieron Marchese, Architectural Digest Middle East, 12 August 2026
GROS BEAD gives a furniture family another place to repeat a detail. Ariel André and GOLEM carry a continuous surface of wooden beads from seat to back across a series of five chairs. The repeated assembly helps define the family. For a site-specific furniture brief, put the outline of each complete chair on the room plan and its common construction on the shop drawing. Those drawings answer different questions when a new variant needs to fit the same room.
The furniture brief can distinguish the decisions that belong to the room from those that belong to the movable pieces. Mark the edges that must fit a wall, ledge, or opening. Then mark the edges staff will bring into contact with one another. An edge that follows an angled wall may be worth making once as a separate end piece. A repeatable connector stays useful on a square end that can meet several other pieces. Before asking a shop to repeat a curve, put it on both furnished plans and see which edge will be exposed to a person when the pieces separate.
Work from the part of the room that constrains both layouts. An existing column may take the top of a bench out of use for part of its length but still let the rest of the bench sit clear of the route to the door. In a proposed gallery, sketch the bench as a continuous piece in one plan and as two shorter ones in the other. Give each half an arm or finished end it can keep after it is moved. A common dimension on the shop drawing then has a reason visible on the room plan.
Test a configuration with the pieces that already belong in the room
At the Diriyah Biennale Foundation's Public Programs Building, Ariel André and GOLEM placed a 24-meter sofa built with local craftspeople at the center of the foyer. The studio describes how the sofa, the shared amoeba-shaped tables, and loose chairs work together for a conversation or a larger event. In Serag Heiba's interview for SceneHome, André describes rearranging tables, chairs, and stools for different group sizes. A venue working with that combination can draw the sofa first, then place loose furniture where an instructor can approach it and participants can still get past people on the sofa. Test those positions and routes in the next venue with the furniture occupied. Serag Heiba, SceneHome, 12 September 2026
At PwC's Experience Center in Zurich, Stephan Hürlemann and Vitra developed the Dancing Wall, a mobile element for an office with an open layout. Its position changes the edge of a work area. The same nominal footprint can feel different when a wall defines where chairs turn or puts a writing surface beyond someone's reach. At the prototype review, stand on the side where a person has to use the object. A group of working tables beside a mobile divider may need one face of the divider clear even when the opposite face can sit against a furniture group. Vitra, PwC Experience Center in Zurich
Give staff an arrangement they can put together
In their study of flexible engineering classrooms, Aaron W. Johnson and colleagues separated the presence of movable furniture from the ways instructors used the available equipment and room arrangement. Make the same distinction at procurement. Give the operator one ordinary activity and one occasion when the room needs to change. Ask them to set each up with the proposed parts. An instructor who needs a single long surface may join tables at the short ends. Another may need three clusters for separate tasks. With both layouts drawn, count which end pieces appear on the outside and which can stay in the store. Aaron W. Johnson et al., American Society for Engineering Education, 2019
The maker needs a plan keyed to a short list of the middle, end, and corner pieces. In one possible workshop, the ordinary day needs three groups and the review day uses one continuous surface. Build one middle and one end at full size. Try closing the surface at the common joint and then put both pieces back in separate groups. The operator should approve the two plans and the counted inventory before the client orders the remaining pieces.