People arriving together should have a choice of places where they can sit alongside each other in each furniture layout. A furnished plan can check the approach and space at each place with chairs pulled out and other seats occupied. At a table, that includes the usable edge and clearance below it. Around a bench or at a talk, it includes who can sit together and what each person can see.
Draw a choice beside the seats people use
The Smithsonian’s exhibition design guidelines illustrate space for a wheelchair next to a bench so visitors can sit or transfer beside a companion. Put the bench and the companion space on the furnished plan together. In a proposed gallery, show an option close to the interpreter and another among friends farther back. Draw the view from both occupied positions and mark where someone can leave during the event. When the seating changes for a discussion, move those choices into the new arrangement and check that both can still be reached. Smithsonian Institution, Guidelines for Accessible Exhibition Design, figures 31 and 32
The Victoria and Albert Museum’s Design and Disability exhibition access guide distinguished seating in the galleries from a dedicated rest space. Its published description gives an operator a reason to examine options between the first and last room of an exhibition. Add a position where someone can pause near the group and a place away from the busiest route. In the talk layout, keep a choice with a useful view. In the everyday plan, keep a companion position beside a supported seat that someone can use for a longer visit. Victoria and Albert Museum, Design and Disability access guide, 2025
Keep the underside of the table on the drawing
For adult dining surfaces within its scope, the United States’ 2010 ADA Standards require at least five percent of seating and standing spaces to comply with section 902, dispersed throughout the space or facility. Section 902 requires a forward approach with knee and toe clearance and a surface 28 to 34 inches above the finished floor. Check the scope before using these provisions. Put a section through each proposed usable tabletop edge and draw the frame and joining hardware at their actual positions. A place at the end of a module can lose its knee space when a second module brings a leg or a connecting plate into the opening. United States Access Board, 2010 ADA Standards, §226 United States Access Board, technical provisions, §902
Edward Steinfeld and his colleagues compared accessibility standards with anthropometric evidence on wheeled mobility and found differences in the space and dimensions considered. For a mock-up, invite users of different mobility devices to try a working position and a place beside someone else. Check the turn and the working reach with the expected task on the table. If the chosen leg position makes one of those actions awkward, try the end detail on the prototype while it can still be changed. Edward Steinfeld et al., Assistive Technology, Anthropometry and standards for wheeled mobility, 2010
The same group of people can be drawn at the table in each arrangement to see whether the choices remain usable when it changes. For example, draw three small clusters in the first layout and one long table made from the same pieces in the second. Mark the places for wheelchair users at two different edges along the long table. Give each place its own route from the door. When each neighboring chair is pulled out, check whether a person can still reach the marked position. A continuous line of tops can hide the joint that determines the choice. In the section, show the clear space where two frames meet.
Reopen a place after the room changes
In France, article 16 of the April 20, 2017 accessibility order for relevant new public buildings places accessible seating along an adapted route. It allows staff to clear places on arrival in restaurants and multipurpose rooms without a specific seating fit-out. If the operator plans to clear a loose chair on arrival, draw where the chair goes. Try the move after the other guests are seated. The path to the chair store and the position it leaves both have to work at that moment. France, Légifrance, Arrêté du 20 avril 2017, article 16
At the Diriyah Biennale Foundation’s Public Programs Building, Ariel André and GOLEM combined a large foyer sofa with loose tables, chairs, and stools intended for rearrangement. For a room using those two kinds of seating, draw a workshop with places within the groups and a talk with choices among the audience. In the workshop, put one accessible place where a participant can share tools and a second where they can work next to a friend. In the talk, test sightlines and access alongside companions again. Have the operator keep both plans and try the change with the people who use the room before accepting the furniture. Serag Heiba, SceneHome, Diriyah Public Programs Building, 2026