A seating trial can cover the whole movement of using the piece, from getting to it to leaving it. Ask people to approach, sit or park alongside, spend time there and leave. Build the parts that affect those actions at their intended dimensions. Put the prototype in a representative setting with a neighbouring seat, a table or exhibit and a marked circulation route. Record what people do as well as what they report.
Build the details that change use
The trial needs the intended seat surface or a sample of comparable firmness. Include the backrest and any arms in the positions proposed for fabrication. Check that feet can reach the ground and that someone can move forward and stand. Test the space underneath and beside the seat with users of different mobility aids. Ask the fabricator how the seat and arms will be fixed and how a damaged part would be replaced. Verify structural performance separately with the appropriate specialist.
A specific task gives people of different heights, ages and mobility needs a way to try the same seat. A museum might ask someone to sit for part of a film, then move on while another person uses the bench. Ask the participant where they feel supported, what they can see and what they would change. Include a space for a wheelchair user beside a companion and check how people enter and leave together. The Department for Transport's Inclusive Mobility guide discusses a range of seat types and wheelchair positions in pedestrian and transport settings. Use it to help shape the test and confirm the requirements of the space being designed. Department for Transport, Inclusive Mobility
Try the room in more than one arrangement
At the Bukhara Biennial's Caravanserai site, GOLEM's continuous bench served visitors resting, people looking at works and performers. Take that mix of uses into the prototype brief when designing a seat for a public programme. Draw space for the person sitting, the people gathering and the route that has to stay open. Show how those positions change when furniture is added for an event.
The public record can describe who tried each arrangement and under what conditions while protecting participants’ identities. Give every proposed change a drawing reference and decide which ones need another test. If the bench will share a gallery with cases or projected work, use the Smithsonian’s exhibition guidance to include the view from the seat and the movement past it in the record. Smithsonian Guidelines for Accessible Exhibition Design Keep the approved sample or record of the prototype for comparison during fabrication. After installation, check that floor levels, upholstery and furniture placement match the assumptions behind the result. Smithsonian Guidelines for Accessible Exhibition Design
Commission a prototype review with GOLEM before fabrication. Bring the real floor finish and neighbouring furniture so the result can be checked against the installed room.