GOLEMArchitecture·Art·Design

02.g.9How do you test an accessible reception desk before fabrication?

A full-scale section of the reception desk lets staff and visitors try a real exchange from both sides. Include the front, equipment and the furniture next to it. Ask visitors and staff to try the actions they will perform, such as paying, reading a map and communicating in a noisy foyer. Check approach, reach, view and speech with the same arrangement.

The mock-up needs the intended terminal, microphone or hearing assistance equipment, screen and printed materials. Simulate the reach to a ticket or card while someone is holding a bag or using a wheelchair. Test an exchange that needs privacy and one where the visitor wants to see the staff member's face clearly. Draw the queue around this position. The desk can have a usable lower surface and still be difficult to find if the line leads only to the high part. Where the exchange requires a forward approach, check the space below the surface with any bag shelves, cable runs and equipment cases in their proposed positions. In the United States, section 904 of the ADA Standards covers sales and service counters within its scope. Confirm the applicable requirements, including any separate workforce provisions, with the local design team. US Access Board, Chapter 9, Built-In Elements

GOLEM's Superzoom project puts a human point of contact at the start of the gallery visit by opening directly into the director's office. A staffed museum desk has a different brief. The same arrival sequence gives a useful place to begin testing it. Ask participants to approach from the entrance and see if they can identify whom to ask and where to make contact. Try the exchange seated and standing with people passing behind the visitor.

A member of staff should be able to try the counter with their own chair and equipment and the room they need to move between tasks. Ask them what changes during a busy event. Record modifications directly on the fabrication drawing and name which details need checking on the installed desk. The completed counter will have the real materials, lighting and noise conditions, so keep time for an operational check before opening.

Bring Ariel André and GOLEM the proposed desk elevation, equipment list and the busiest arrival scenario. Commission a joinery and reception trial before the drawings go to tender or fabrication.