GOLEMArchitecture·Art·Design

02.b.12How can temporary installations keep an accessible route clear?

Exhibition and event teams need the same dimensioned drawing of the route visitors will use. Mark the space around doors, turns and places where visitors stop. Show what must stay clear during installation, opening hours and dismantling. Ask the team to return the drawing with the positions of cases, barriers, cables and waiting visitors marked. Put one person in charge of checking it on site.

Measure the room in use

The route that looks clear in an empty gallery also needs to work during a crowded opening. Put someone reading a label beside a person passing with a mobility aid. Show where a companion would stand, where a visitor could wait seated and whether the door can still open fully. A case can sit outside the circulation area on a plan while the people looking into it occupy the route. Move the case, change the viewing position or give that stop more space. The Smithsonian's exhibition guidance addresses both circulation and furniture. The US Access Board's guidance also explains the hazard posed by projecting objects along circulation paths under US ADA provisions. Review dimensions against local requirements. Smithsonian Guidelines for Accessible Exhibition Design US Access Board, protruding objects

A section can show obstructions that are easy to miss on the plan. Look for projecting signs, display brackets and cables running between equipment and outlets. Draw the installation with the doors in use. If an exhibit needs power near a crossing, review the location of the outlet with the technical team while the installation can still move. Give the contractor and the venue team a record of which fixings belong to the display and which routes need to be restored when it comes out.

Make the places to stop part of the exhibition

At the Bukhara Biennial's Caravanserai site, Ariel André - GOLEM designed a continuous bench used as seating, a performance space and a place to look towards nearby works. A museum planning a comparable arrangement can draw the seat, the space occupied by a seated person and the passage behind or beside them together. Test those positions when the room is set up for a performance as well as when the bench is used for rest.

Before opening, have the installer and front-of-house team walk the agreed route with the display in place. Check that the space is still available when the doors open, people gather and movable furniture is put to use. Keep the signed-off plan at the venue. Whenever a case or queue barrier moves, check the affected part of the route again.

Issue GOLEM the installation plan and a photograph of the busiest opening. A drawing for the exhibition team can identify the space occupied by viewers and the route the crew must keep clear.