GOLEMArchitecture·Art·Design

02.d.5How can furniture accommodate people who need help standing up?

Some seats should let a person put both feet on the floor, move forward and use their hands for support if they choose. Leave room in front for the movement and alongside for a companion or mobility aid. Test a range of seat heights, depths and arm positions with actual users. Someone who needs help rising may also need a stable place to put a walking stick or bag.

Draw the movement in section

The seat’s working height depends on how it behaves when someone sits on it. A cushion can place someone lower than the drawing suggests. Check whether the leading edge and base leave room to bring the feet back before rising. Compare the position of the arms in relation to the hand as the person leans forward. The best place to grip may differ from the point where the forearm rests while sitting. A low, deep seat may suit a long conversation for one visitor and require more effort for another.

The Department for Transport's Inclusive Mobility guide discusses conventional seats, armrests and perch-type supports in transport and pedestrian settings. Use those distinctions to discuss which positions a venue needs. A museum can provide a supported upright seat near a long display and a place to lean at a short stop, provided the route and the applicable access requirements are met. Department for Transport, Inclusive Mobility

Put the support where people need it

GOLEM describes AMOREBA, in its Curator's Pit configuration, as a place for conversation and reading. It offers a useful reference when a public project includes informal, upholstered seating. Draw how someone joins that group, including an upright seat within conversational reach and room to stand up beside it. Check which upholstery and seat geometry suit that position. The project reference concerns social seating and gives the public brief a question to resolve at full scale.

York’s accessible seating review includes the visual contrast of armrests. Check that someone can identify the support from the point they approach the seat. City of York, Accessible Seating Review

The fabricator and technical adviser need to check the seat’s stability and the loads its arms will carry. Involve visitors with different mobility needs in the prototype test and let them choose whether and how to participate. Include people who transfer from a wheelchair and check the positions where an open side matters. Give the operator the tested layout and review it when furniture is moved. A seat that works in the prototype may be harder to use when a table or display occupies the space in front.

Brief GOLEM and the fabricator together on a supported seat within the main seating group. Include a prototype test of the seat under load and the space a person needs to rise.